Electric drive for throughgoing spindle

Product Description

Powerful 24 V DC motor with worm gear, designed for an axis parallel through-going spindle. Ideal for complete integration in a lifting column. The drive is suitable for axial compressive and tensile load. A cable with standard connector and integrated Hall sensor technology permit simple and secure control of the entire system.

Special features
> Two integrated Hall sensors for recording the rotations and the rotational direction
> Different types of internal threads
> Good self-locking properties
> Low noise

Attention
> Spindle not included; must be ordered separately
> The drive must be protected from exposure to radial forces by a separate guide system
> The work area (nominal torque) has been determined according to the specifications of DIN EN 527 (Upward under load, downward unloaded): Service life 10,000 double strokes

* Nominal torque determined in accordance with DIN EN 527: Service life of 10,000 double strokes
** The controller regulates the system in such a way that the travel speed in the entire work area of the drive is kept as constant as possible
*** In combination with controller, which has a short circuit brake

For prices and availability contact our sales team on 01623 655 265.

Product Code Motor Sensor/Power supply Duty cycle with idle running Short-term peak torque (< 1 sec) Protection class Operating temperature Power (IN) bei MN Idle running speed (n) Rated torque* (MN) Duty cycle with MN* Max. pressure force (Fmax.) Movement speed (constant from F= 0 bis Fmax.)** Static back drive*** Output (Inner thread)*** No. of Packs
4779.00-0001 DC Motor 24 V Hall/5 V DC/0.3 A 20% (at 5 min.) 6 Nm IP30 0° bis +30° 6.3 A bei 3.5 Nm 133 U/min 3.5 Nm 20s ON 240s OFF 1800 N 17 mm/s 180 kg SG12x12P4 RH Enquire Now
4779.00-0002 DC Motor 24 V Hall/5 V DC/0.3 A 20% (at 5 min.) 6 Nm IP30 0° bis +30° 7 A bei 4 Nm 133 U/min 4 Nm 33s ON 240s OFF 2200 N 12 mm/s 220 kg Tr16x8P4 RH Enquire Now
4779.00-0003 DC Motor 24 V Hall/5 V DC/0.3 A 20% (at 5 min.) 6 Nm IP30 0° bis +30° 7 A bei 4 Nm 133 U/min 4 Nm 16s ON 240s OFF 1500 N 24 mm/s 150 kg SG14x16P4 RH Enquire Now