Electric drive for throughgoing spindle - 4779.00-0002
Powerful 24 V DC motor with worm gear, designed for an axis parallel through-going spindle. Ideal for complete integration in a lifting column. The drive is suitable for axial compressive and tensile load. A cable with standard connector and integrated Hall sensor technology permit simple and secure control of the entire system.
Special features
> Two integrated Hall sensors for recording the rotations and the rotational direction
> Different types of internal threads
> Good self-locking properties
> Low noise
Attention
> Spindle not included; must be ordered separately
> The drive must be protected from exposure to radial forces by a separate guide system
> The work area (nominal torque) has been determined according to the specifications of DIN EN 527 (Upward under load, downward unloaded): Service life 10,000 double strokes
* Nominal torque determined in accordance with DIN EN 527: Service life of 10,000 double strokes
** The controller regulates the system in such a way that the travel speed in the entire work area of the drive is kept as constant as possible
*** In combination with controller, which has a short circuit brake
For prices and availability contact our sales team on 01623 655 265.
Motor | Sensor/Power supply | Duty cycle with idle running | Short-term peak torque (< 1 sec) | Protection class | Operating temperature | Power (IN) bei MN | Idle running speed (n) | Rated torque* (MN) | Duty cycle with MN* | Max. pressure force (Fmax.) | Movement speed (constant from F= 0 bis Fmax.)** | Static back drive*** | Output (Inner thread)*** |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DC Motor 24 V | Hall/5 V DC/0.3 A | 20% (at 5 min.) | 6 Nm | IP30 | 0° bis +30° | 7 A bei 4 Nm | 133 U/min | 4 Nm | 33s ON 240s OFF | 2200 N | 12 mm/s | 220 kg | Tr16x8P4 RH |