Products
Search
Contact Us
Telephone 01623 655 265

Telephone +44 1623 655 265

Telephone 01623 420 689

Or by post at:

SD Products Limited
The Broadway
Great Central Road
Mansfield
Nottinghamshire
NG18 2RL
UK

Email: sales@sdproducts.co.uk

Products >> Push on Clips, Retainers & Pipe Clips >> Push On Fixes/Nuts

Flat Round Pushnuts



Diagram

Metric

Part No. Stud D H F1 F2
43900 4.0 11.1 1.5 111 712
42960 5.0 11.1 1.3 67 890
46420 6.0 13.5 1.5 111 1780
44340 8.0 16.0 1.8 267 4000
45950 10.0 19.0 1.9 378 4895

Imperial

Part No. Stud D H F1 F2
 47010 1/16 5.0 1.0 89 445
 47020 3/32 5.0 1.0 111 801
 47030 1/8 6.4

0.8

 156  1112 
 47040 1/8 9.5 1.3 116 1558 
 47050 5/32 11.1  1.2 67  267 
 47060 3/16  11.1  1.4 67  890 
 47070 3/16  11.1  1.6  111  1780 
 47080 1/4  13.5  1.5  111  1780 
 47090 1/4  13.5  1.7  200 2670 
 47100 5/16  11.9  1.0  178  1200 
 47110 5/16  15.9  1.6  180  2900 
 47120 5/16  15.9 1.8  270  1110 
 47130 5/16  23.8  2.5  80  1112 
 47140  3/8  19.1  1.6  222 3115
 47150 3/8  19.1  2.1  378  4900 
 47160 3/8  23.8  2.5  98  1560 
 47170 7/16  22.2  2.5  334  6675 
 47180 7/16  23.8  1.9  134  2275 
 47190 1/2  25.4  2.8  712  8900 
 47200 5/8  25.4  1.9  222  6230

F1 = Maximum Push on Force in Newtons.

F2 = Minimum Holding Strength in Newtons.

 


Description

Flat Round Pushnuts are an economical fastener providing a good balance between maximum holding strength and reasonable push on force.

Material

Austempered Carbon Steel.

Finish

Phosphate Paint Black

Specials

If the Pushnut required is not shown, please enquire to our sales office with the dimensions and quantity.
content-bottom